Skip to content
RemoteClaw

Talk mode

Talk mode has two runtime shapes:

  • Native macOS/iOS/Android Talk uses local speech recognition, Gateway chat, and talk.speak TTS. Nodes advertise the talk capability and declare the talk.* commands they support.
  • Browser Talk uses talk.client.create for client-owned webrtc and provider-websocket sessions, or talk.session.create for Gateway-owned gateway-relay sessions. managed-room is reserved for Gateway handoff and walkie-talkie rooms.
  • Android Talk can opt into Gateway-owned realtime relay sessions with talk.realtime.mode: "realtime" and talk.realtime.transport: "gateway-relay". Otherwise it stays on native speech recognition, Gateway chat, and talk.speak.
  • Transcription-only clients use talk.session.create({ mode: "transcription", transport: "gateway-relay", brain: "none" }), then talk.session.appendAudio, talk.session.cancelTurn, and talk.session.close when they need captions or dictation without an assistant voice response.

Native Talk is a continuous voice conversation loop:

  1. Listen for speech
  2. Send transcript to the model through the active session
  3. Wait for the response
  4. Speak it via the configured Talk provider — synthesized on-device (ElevenLabs direct, with system-TTS fallback)

Browser realtime Talk forwards provider tool calls through talk.client.toolCall; browser clients do not call chat.send directly for realtime consults. While a realtime consult is active, Talk clients can use talk.client.steer or talk.session.steer to classify spoken input as status, steer, cancel, or followup. Accepted steering is queued into the active embedded run; rejected steering returns a structured reason such as no_active_run, not_streaming, or compacting.

Transcription-only Talk emits the same common Talk event envelope as realtime and STT/TTS sessions, but uses mode: "transcription" and brain: "none". It is for captions, dictation, and observe-only speech capture; one-shot uploaded voice notes still use the media/audio path.

Behavior (macOS)

  • Always-on overlay while Talk mode is enabled.
  • Listening → Thinking → Speaking phase transitions.
  • On a short pause (silence window), the current transcript is sent.
  • Replies are written to WebChat (same as typing).
  • Interrupt on speech (default on): if the user starts talking while the assistant is speaking, we stop playback and note the interruption timestamp for the next prompt.

Voice directives in replies

The assistant may prefix its reply with a single JSON line to control voice:

{ "voice": "<voice-id>", "once": true }

Rules:

  • First non-empty line only.
  • Unknown keys are ignored.
  • once: true applies to the current reply only.
  • Without once, the voice becomes the new default for Talk mode.
  • The JSON line is stripped before TTS playback.

Supported keys:

  • voice / voice_id / voiceId
  • model / model_id / modelId
  • speed, rate (WPM), stability, similarity, style, speakerBoost
  • seed, normalize, lang, output_format, latency_tier
  • once

Config (~/.remoteclaw/remoteclaw.json)

{
  talk: {
    provider: "elevenlabs",
    providers: {
      elevenlabs: {
        voiceId: "elevenlabs_voice_id",
        modelId: "eleven_v3",
        outputFormat: "mp3_44100_128",
        apiKey: "elevenlabs_api_key",
      },
      mlx: {
        modelId: "mlx-community/Soprano-80M-bf16",
      },
      system: {},
    },
    speechLocale: "ru-RU",
    silenceTimeoutMs: 1500,
    interruptOnSpeech: true,
    realtime: {
      provider: "openai",
      providers: {
        openai: {
          apiKey: "openai_api_key",
          model: "gpt-realtime-2",
          voice: "cedar",
        },
      },
      instructions: "Speak warmly and keep answers brief.",
      mode: "realtime",
      transport: "webrtc",
      brain: "agent-consult",
    },
  },
}

Defaults:

  • interruptOnSpeech: true
  • silenceTimeoutMs: when unset, Talk keeps the platform default pause window before sending the transcript (700 ms on macOS and Android, 900 ms on iOS)
  • provider: selects the active Talk provider. Use elevenlabs, mlx, or system for the macOS-local playback paths.
  • providers.<provider>.voiceId: falls back to ELEVENLABS_VOICE_ID / SAG_VOICE_ID for ElevenLabs (or first ElevenLabs voice when API key is available).
  • providers.elevenlabs.modelId: defaults to eleven_v3 when unset.
  • providers.mlx.modelId: defaults to mlx-community/Soprano-80M-bf16 when unset.
  • providers.elevenlabs.apiKey: falls back to ELEVENLABS_API_KEY (or gateway shell profile if available).
  • consultThinkingLevel: optional thinking level override for the full RemoteClaw agent run behind realtime remoteclaw_agent_consult calls.
  • consultFastMode: optional fast-mode override for realtime remoteclaw_agent_consult calls.
  • realtime.provider: selects the active browser/server realtime voice provider. Use openai for WebRTC, google for provider WebSocket, or a bridge-only provider through Gateway relay.
  • realtime.providers.<provider> stores provider-owned realtime config. The browser receives only ephemeral or constrained session credentials, never a standard API key.
  • realtime.providers.openai.voice: built-in OpenAI Realtime voice id. Current gpt-realtime-2 voices are alloy, ash, ballad, coral, echo, sage, shimmer, verse, marin, and cedar; marin and cedar are recommended for best quality.
  • realtime.transport: webrtc and provider-websocket are browser realtime transports. Android uses realtime relay only when this is gateway-relay; otherwise Android Talk uses its native STT/TTS loop.
  • realtime.brain: agent-consult routes realtime tool calls through Gateway policy; direct-tools is legacy direct-tool compatibility behavior; none is for transcription or external orchestration.
  • realtime.consultRouting: provider-direct preserves the provider’s direct reply when it skips remoteclaw_agent_consult; force-agent-consult makes Gateway relay route finalized user transcripts through RemoteClaw instead.
  • realtime.instructions: appends provider-facing system instructions to RemoteClaw’s built-in realtime prompt. Use it for voice style and tone; RemoteClaw keeps the default remoteclaw_agent_consult guidance.
  • talk.catalog exposes each provider’s valid modes, transports, brain strategies, realtime audio formats, and capability flags so first-party Talk clients can avoid unsupported combinations.
  • Streaming transcription providers are discovered through talk.catalog.transcription. The current Gateway relay uses the Voice Call streaming provider config until the dedicated Talk transcription config surface is added.
  • speechLocale: optional BCP 47 locale id for on-device Talk speech recognition on iOS/macOS. Leave unset to use the device default.
  • outputFormat: defaults to pcm_44100 on macOS/iOS and pcm_24000 on Android (set mp3_* to force MP3 streaming)

macOS UI

  • Menu bar toggle: Talk
  • Config tab: Talk Mode group (voice id + interrupt toggle)
  • Overlay:
    • Listening: cloud pulses with mic level
    • Thinking: sinking animation
    • Speaking: radiating rings
    • Click cloud: stop speaking
    • Click X: exit Talk mode

Android UI

  • Voice tab toggle: Talk
  • Manual Mic and Talk are mutually exclusive runtime capture modes.
  • Manual Mic stops when the app leaves the foreground or the user leaves the Voice tab.
  • Talk Mode keeps running until toggled off or the Android node disconnects, and uses Android’s microphone foreground-service type while active.

Notes

  • Requires Speech + Microphone permissions.
  • Uses chat.send against session key main.
  • Talk playback is synthesized on-device, not by the gateway: each native app calls the ElevenLabs API directly using the active Talk config, and falls back to the platform’s system TTS (AVSpeechSynthesizer on macOS/iOS, TextToSpeech on Android) when no ElevenLabs API key is configured. The gateway supplies Talk config (talk.config) and mode state (talk.mode) only — it performs no speech synthesis.
  • stability for eleven_v3 is validated to 0.0, 0.5, or 1.0; other models accept 0..1.
  • latency_tier is validated to 0..4 when set.
  • Android supports pcm_16000, pcm_22050, pcm_24000, and pcm_44100 output formats for low-latency AudioTrack streaming.